Pengaplikasian Beton SELF COMPACTING CONCRETE (SCC) dengan dosis Sikament-NN 0,6% ,0,7%, 0,8% dan penggunaan Agregat asal Quarry Waisakula Ambon
DOI:
https://doi.org/10.51135/manumatav8i1p42-49Keywords:
SCC Concrete, Sikament-NN, Concrete Compressive StrengthAbstract
Self-compacting concrete (SCC) is an innovation in the construction world. to facilitate service, especially in areas that are difficult to reach so there is no need to use a vibrator. This research was conducted to determine the compressive strength of normal concrete and SCC concrete 0.6%, 0.7%, and 0.8%, as well as the performance ratio for normal concrete and SCC concrete 0.6%, 0.7%, and 0. 8%. The research was carried out in the UKIM structure laboratory with materials for making SCC concrete including sand and crushed stone produced by PT. BAKUNG PERMAI ABADI, cement type 1 brand Tonasa, water from UKIM campus, and Sikament-NN added materials produced by PT. SIKA INDONESIA. The experimental method used is guided by the concrete mix design procedure according to SNI 03-2834-2000. The compressive strength results obtained by normal concrete 28 days = 22.71 MPa, 0.6% SCC concrete = 23.29 MPa, 0.7% SCC concrete = 23.29 MPa, concrete SCC 0.8% = 22.04MPa. Percentage of achievement obtained for normal concrete = 114%, 0.6% concrete SCC = 116%, 0.7% concrete SCC = 116%, and 0.8% concrete SCC = 110%. Thus, the results of the research on the compressive strength of normal concrete and SCC concrete with the addition of Sikament-NN met the planned compressive strength of 20 MPaReferences
Badan Standardisasi Nasional (2002) ‘Tata Cara Perhitungan Struktur Beton Untuk Bangunan Gedung. SNI 03-2847-2002’, Bandung: Badan Standardisasi Nasional, p. 251.
Concrete, S. C. ‘2.studi pustaka 2.1.’, pp. 5–18.
EFNARC (2005) ‘The European Guidelines for Self-Compacting Concrete’, The European Guidelines for Self Compacting Concrete, (May), p. 63. Available at: http://www.efnarc.org/pdf/SCCGuidelinesMay2005.pdf.
Egziabher, T. B. G. and Edwards, S. (2013)’, Africa’s potential for the ecological intensification of agriculture, 53(9), pp. 1689–1699.
Indonesia, S. N. and Nasional, B. S. (2000) ‘Tata cara pembuatan rencana campuran beton normal’.
Indonesian National Standardization (2012) ‘SNI 7656:2012 “The procedure of selecting proportion for normal, heavyweight, and mass concreteâ€â€™, Badan Standardisasi Nasional.
Polii, R. A., Sumajouw, M. D. J. and Windah, R. S. (2015) ‘Kuat Tekan Beton Dengan Variasi Agregat Yang Berasal Dari Beberapa Tempat Di Sulawesi Utara’, Jurnal Sipil Statik, 3(3), pp. 206–211.
‘Sikament NN - Dinamika Utama - Solusi Bangunan - Supply Material Dan Applikator _ Produk Sika’.
SNI 03-1968 (1990) ‘Metode Pengujian Tentang Analisis Saringan Agregat Halus dan Kasar’, Badan Standar Nasional Indonesia, pp. 1–5. Available at: http://staff.uny.ac.id/sites/default/files/pendidikan/dr-slamet-widodo-st-mt/sni-03-1968-1990.pdf.
SNI, 2847:2013 (2013) ‘Persyaratan Beton Struktural untuk Bangunan Gedung’, Bandung: Badan Standardisasi Indonesia, pp. 1–265.
SNI1974-2011 (2011) ‘Cara Uji Kuat Tekan Beton dengan Benda Uji Silinder’, Badan Standardisasi Nasional Indonesia, p. 20
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).