Analisis Tebal Lapis Perkerasan Lentur Dengan Menggunakan Metode Bina Marga 1989 dan Metode Manual Desain Perkerasan Jalan 2017 Pada Ruas Jalan Desa Rambatu-Manusa, Kecamatan Inamosol, Kabupaten Seram Bagian Barat

Authors

  • J. Amahoru Universitas Kristen Indonesia Maluku
  • V M. Matitaputty Universitas Kristen Indonesia Maluku
  • Yani Solseley Universitas Kristen Indonesia Maluku

DOI:

https://doi.org/10.51135/manumatav9i1p78-89

Keywords:

Thick, Pavement, Method BM 1989, MDP 2017

Abstract

Analysis of Flexible Pavement Layer Thickness Using the 1989 Bina Marga Method and 2017 Road Pavement Design Manual Method on the Rambatu-Manusa Road Section, Inamosol District, West Seram Regency The highway is one of the indispensable transportation infrastructure, which connects one area to another. This is because the road is a supporter of various development sectors and is an infrastructure in the construction of residential areas, industrial areas, mining areas and the opening of isolated areas in the area along the road. Pavement is a structure that is placed on the subgrade, which separates the vehicle tires from the subgrade underneath. Pavement serves to protect the subgrade and pavement-forming layers from experiencing excessive stress and strain due to traffic loads. Pavement thickness planning is one of the stages in road work with the main goal of providing optimal service to road users. One of them is on the Rambatu-Manusa road, Inamosol District, West Seram Regency. in the grouping of roads included in the category of Regency road status. The existing condition on this road segment is that there is still subgrade and there is no pavement along the 2.50 Km and 3.00 M width, the purpose of this study is to analyze the thickness of the flexible pavement layer on the Rambatu-Manusa road, Inamosol District, West Seram Regency with the method Highways 1989 and the 2017 Pavement Design Manual Method, and Analyzing the Comparison of Technical Studies between the 1989 Highways Method and the 2017 Road Pavement Design Manual Methods In this study, the 1989 Bina Marga Method and the 2017 Road Pavement Design Manual Method were used to plan the thickness of the flexible pavement layer on the Rambatu-Manusa road section. After analyzing the thickness of the pavement layer using the 1989 Bina Marga Method, it was obtained that the Mechanical Lapen with a thickness of 5 Cm, the upper foundation layer with a thickness of 10 Cm, and the sub-base layer with a thickness of 10 Cm. Meanwhile, with the 2017 Road Pavement Design Manual Method, the HRS WC surface wear layer is 5 cm thick, and the top foundation layer is 15 cm thick

References

Depatemen Pekerjaan Umum Direktorat Jendral Bina Marga, SNI 1732-1989

Departemen Pekerjaan Umum Direktorat Jenderal Bina Marga, 2005, Panduan Penetapan CBR Lapangan Melalui Pengujian Dengan Alat DCP (Dynamic Cone Penetrometer), Nomor: SMD-06/DCP

Fatkhusani, F. (2018). Perbandingan Efisiensi Harga Perkerasan Lentur Dan Kaku Dengan Metode Bina Marga. ProsidingSemnastek, 1-8. https://jurnal.umj.ac.id/index.php/semnastek/article/view/3552

Fitriadi, F., Gandarum, D. N., Jimmy S, J. S., & Juwana, J. (2018). Pengaruh Kelas Jalan Dan Akses Transportasi Umum Terhadap Perubahan Fungsi Hunian Menjadi Komersil Di Kecamatan Kembangan.Penelitian Dan Karya Ilmiah, 3(2), 19. https://doi.org/10.25105/pdk.v3i2.2982

Kementerian Pekerjaan Umum, Pedoman Cara Uji California Bearing Ratio (CBR) Dengan Dynamic cone Penetrometer (DCP) Nomor04/SE/M/2010

Mantiri, C. C., Sendow, T. K., & Manoppo, M. R. .(2019). Analisa Tebal Perkerasan Lentur Jalan Baru Dengan Metode Bina Marga 2017 Dibandingkan Metode Aashto 1993.Jurnal Sipil Statik, 7(10), 1303–1316.

Metode, D., & Komponen, A. (1989). Perencanaan tebal perkerasan lentur dengan metode analisa komponen.1–25.

Pratama, R. P., & Anwar, S. (2017). Analisis dan Perencanaan Jalan tidak Sebidang (Underpass) (Studi Kasus Jalan Raya Kanci-Sindanglaut Kabupaten Cirebon). Jurnal Konstruksi, VI(4), 319–326.

Saputra, R. (2019). ??No Title No Title.Journalof Chemical Information and Modeling, 53(9), 1689–1699.

Sukirman, Silva, 1999, Perkerasan Lentur Jalan Raya, Bandung, Penerbit Nova

Downloads

Published

2023-06-19

Issue

Vol. 9 No. 1 (2023)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).