Perencanaan Tebal Perkerasan Lentur Dengan Menggunakan Metode Analisa Komponen Bina Marga 1987 Dan Metode Manual Desain Perkerasan Jalan 2017 Pada Ruas Jalan Ir. Soekarno Lauran Kabupaten Kepulauan Tanimbar

Penulis

  • N Lewaherilla UNIVERSITAS KRISTEN INDONESIA MALUKU
  • N Paulus UNIVERSITAS KRISTEN INDONESIA MALUKU
  • Yuliana Samponu UNIVERSITAS KRISTEN INDONESIA MALUKU

DOI:

https://doi.org/10.51135/manumatav10i2p140-152

Kata Kunci:

Planning, Highway, Flexible Pavement, Highways.

Abstrak

Road pavement is a construction built on top of the subgrade, which functions to support traffic loads. There are generally two types of pavement construction, namely flexible pavement and rigid pavement. Pavement planning is one of the most important things for the construction of a road so it is necessary to do accurate analysis of the conditions that affect the planning itself. The planning of flexible pavement of the Ir. Soekarno Lauran intersection (Sta 00+000 - Sta 03+200) will facilitate the flow of transportation in the area is necessary because it has an impact on regional development and improvement of community welfare. This research aims to plan a good road pavement on the Ir. Soekarno Lauran road section (Sta 00+000 - Sta 03+200) using the 1987 Bina Marga Component Analysis method and the 2017 Road Pavement Design Manual method with the type of pavement is flexible pavement. The data obtained is sourced from the Tanimbar Islands Regency Public Works Office which is secondary data. The analysis used in this research is to use standardized formulas. The results obtained from this research with the 1987 Bina Marga Component Analysis method are Surface Course = 5 cm, Base Course = 15 cm, Sub Base Course = 15 cm. With a plan life of 20 years.

Referensi

Arifianto, A. K. (2018). PERENCANAAN PERKERASAN LENTUR METODE BINA MARGA PADA . Fakultas Teknik, Universitas Tribhuwana Tunggadewi Malang.

Lebang, N. L., & Lewaherilla, N. M. Y. (2021). Analisa Stabilitas Campuran Aspal Beton Lapis Aus (AC-WC) Dan Karet Alam Sebagai Material Perkerasan Jalan. Jurnal Manumata, 7(2), 140–146.

Mantiri, C. C. (2019). Analisa tebal perkerasan lentur jalan baru. 1.

Mantiri, C. C. (2019). Analisa tebal perkerasan lentur jalan baru dengan metode Bina Marga. Jurnal Sipil Statik, 1.

Manual Desain Perkerasan Jalan (2017). No. 02/M/BM/2017.KEMENTERIAN PEKERJAAN UMUM DAN PERUMAHAN RAKYAT. DIREKTORAT JENDERAL BINA MARGA

Manual Desain Perkerasan Jalan (2017). No. 01/S/MDP/2017. Suplemen 2020. KEMENTERIAN PEKERJAAN UMUM DAN PERUMAHAN RAKYAT. DIREKTORAT JENDERAL BINA MARGA

N.M.Y. Leweherilla, J. Amahoru, & Maria Kelbulan. (2022). Analisis Perencanaan Tebal Perkerasan Lentur Dengan Menggunakan Motode Manual Desain Perkerasan (MDP) 2018 Pada Ruas Jalan Desa Lauran Kecamatan Tanimabr Selatan Kabupaten Kepulauan Tanimbar. Jurnal Manumata, 8(1), 20–27. https://doi.org/10.21608/pshj.2022.250026

Nur Khaerat Nur., d. (2021). Perancangan perkerasan jalan. Yayasan Kita Menulis.

Nuryati, S. (2016). Analisis tebal lapis perkerasan dengan metode Bina Marga 1987

.

Sari, T. L. (2018). Perencanaan Tebal Lapis Perkerasan Lentur Jalan dengan Metode Bina Marga dan Analisa Komponen. Jurnal Teknik Sipil.

SNI 1744 - 2012. Tentang Metode Uji CBR Laboratorium.

Sukirman, S. (2016). Perencanaan Lentur Jalan Raya. Institut Teknologi Bandung.

Susanto, H. S. (1999). Rekayasa Jalan Raya. Penerbit Universitas Atma Jaya Yogyakarta.

Umum, D. P. (1987). Petunjuk Perencanaan Tebal Perkerasan Lentur Jalan Raya Dengan Metode Analisa Komponen. Yayasan Badan Penerbit PU, 4-13.

Umum, D. P. (1989). Sifat tanah dasar yang dinyatakan dengan nilai CBR tanah.

Unduhan

Diterbitkan

2025-01-28

Terbitan

Vol 10 No 2 (2024): Manumata Jurnal Teknik

Bagian

Articles

Lisensi

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).